notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 1 of 1 frequency (mhz) insertion loss (db) input r. loss (db) amplitude unbalance (db) phase unbalance (deg.) 50 ? 650 to 4000 mhz rf transformer surface mount TC1-1-43X+ maximum ratings pin connections features ? balanced to unbalanced transformation ? push-pull amplifers ? pcs/dcs ? mmds primary dot 6 primary 4 secondary dot 1 secondary 3 not used 2 ? wideband, 650 to 4000 mhz ? balanced transmission line ? good return loss ? excellent amplitude unbalance, 0.5 db typ. and phase unbalance, 3 deg typ. in 1 db bandwidth ? plastic base with leads ? aqueous washable applications operating temperature -40c to 85c storage temperature -55c to 100c rf power 250mw dc current 30ma electrical specifcations (t amb =25c) rev. a m151107 TC1-1-43X+ ed-13728a/2 ig/cp/am 151221 typical performance data case style: at1521 ? ratio frequency (mhz) insertion loss* phase unbalance (deg.) typ. amplitude unbalance (db) typ. 2 db mhz 1 db mhz 1 db bandwidth 2 db bandwidth 1 db bandwidth 2 db bandwidth 1 650-4000 650-4000 800-3000 3 4 0.5 0.5 *insertion loss is referenced to mid-band loss, 0.5 db typ. confg. g 650.00 0.30 19.40 0.72 7.04 700.00 0.30 19.03 0.70 6.11 800.00 0.32 19.01 0.65 4.73 1000.00 0.35 18.85 0.50 3.45 1600.00 0.45 16.34 0.15 0.32 2000.00 0.53 15.36 0.05 0.42 2600.00 0.62 16.20 0.40 0.66 3000.00 0.57 20.76 0.56 1.07 3800.00 1.34 9.18 0.41 4.79 4000.00 1.71 7.51 0.09 5.95 permanent damage may occur if any of these limits are exceeded. outline drawing at1521 outline dimensions ( ) inch mm a b c d e f .150 .150 .160 .050 .040 .025 3.81 3.81 4.06 1.27 1.02 0.64 g h j k wt .028 .065 .190 .030 grams 0.71 1.65 4.83 0.76 0.15 input return loss 5.0 7.0 9.0 11.0 13.0 15.0 17.0 19.0 21.0 23.0 500 1000 1500 2000 2500 3000 3500 4000 frequency (mhz) return loss (db) insertion loss 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 500 1000 1500 2000 2500 3000 3500 4000 frequency (mhz) insertion loss (db) pcb land patter n sugg ested l a y o ut, t ol eranc e t o be withi n .002 note: 1. case material plastic 2. termination finish: tin plate over nickel plate. 3. lead #1 identi er shall be located in the cross-hatched area shown, on bottom view. identi er may be either a molded or marked feature. 4.top-hat total thickness: 0.13 inches max. a vailable t ape and reel at no extra cost reel size devices/reel 7? 20, 50, 100, 200, 500 13? 1000, 2000 top hat ? +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
